There are three methods you can use to make a classic ristretto shot, however, your machine must include a setting for making a ristretto shot. If you don’t, you’ll need to play with your machine that has a normal single espresso shot function. You should have a stop button that will let you stop the brewing. You also need to time the number of seconds of your machine when it makes an espresso.
Since a ristretto is half the amount of water, you’ll need to use the stopwatch setting on your smartphone to get the best timing. On average, this time will range from 15 to 25 seconds. This time difference will change with the grind setting that you choose. Finer coffee grounds will take longer due to the tamping and the time it takes to extract through finer grounds.
Grind your coffee beans as you normally would for making espresso. Medium-fine is a good start if you like it this way. Add espresso to your portafilter and use light tamping. Start your machine and then stop it after 15 seconds. The finished ristretto can have sugar added for sweetness if you like.
Method 2- (Advanced recipe)
Set your coffee grinder to a finer setting so you have grounds that are finer than your average grind setting. Put this ground into your portafilter and tamp it using twice as much pressure. Not so compact, but double what you did with a standard espresso tamping. Start your machine and stop it when you reach 22-25 seconds. You can now try your ristretto to see if you want to add sugar or not.
Method 3- (Expert recipe)
Stick to your regular espresso grind setting and add the coffee grounds into your portafilter. This also will use light tamping that is the same for all espresso tamps. Now all you need to do is extract the coffee for 25 seconds, but no longer than that. Because you didn’t tamp the ground you’ll get a little bit more water in your ristretto than usual. Taste the results and add sugar for additional sweetness.